Encap 500 Adhesive Encapsulator

  • Encap 500 Adhesive Encapsulator

All photography is for illustrative purposes only.

Encap 500 Adhesive Encapsulator

  • Availability
    Usually in stock
  • Price

Encap 500 is a multi-functional two-component, solvent free, water based epoxy barrier coating specifically engineered for use as an adhesive encapsulator over pre-existing adhesive residue. It will assist in the adhesion of the MS Plus Adhesive to concrete and has a rapid room temperature cure. We recommend prior to installing wood flooring onto sand and cement/concrete/anhydrite screed, at least one coat of Taylor Encap 500 is applied to the substrate.It provides good solvent, chemical and corrosion resistance as well as long term water humidity resistance.


One coat: 25m2

Installation & Care
Our guides
Please read our installation guides to quantify how much of each fixing and maintenance product you require. We recommend that the relevant tile installation guide is read prior to ordering and installation.
Delivery Details
  • We operate a nationwide delivery service. Our delivery costs vary depending on product and weight, so are therefore calculated during the checkout process. For further information on our charges please click here.